Kiilto SR DF
A dust reduced, quick setting plaster for walls and ceilings. Particularly for straightening concrete and blocks walls prior to waterproofing and tiling. Cementitious.
Special features
- fast, dust reduced, good filling properties
- general and finishing levellings
- coverage 1.5 kg/m²/mm
- coatable: 5 mm/4 h, 20 mm/24 h and 40 mm/3 d
- for interior areas
Application
Kiilto SR DF is suitable for smoothing interior walls and ceilings. It can also be over plastered with other Kiilto wall plasters depending on the application. Not suitable for areas that are permanently under water (for example, swimming pools).
Package Size
20 kg
EAN Code
6411512285207
Application temperature
recommendation +18–20 °C, lowest operating temperature +5 °C
Bond strength
> 0,5 MPa (EN 998-1)
Coatable
In overall plastering approx. 4 h, in partial plasterings 24 h 20 mm and 3 d up to 40 mm.
Colors
grey
Compression strength
class CSIV (EN 998-1)
Coverage
1 mm layer/m² solid matter weights approx. 1.5 kg
Layer thickness
overall plastering 2–10 mm, partial plastering 2–40 mm
Max. grain size
approx. 0.5 mm
Mixing ratio
5.2–5.8 l water / 20 kg bag
Package sizes
20 kg bag
Storage
In an unopened package 6 months in dry conditions
Substrate humidity
concrete < 90 % RH
Type/binder
Polymer-cement-sand-based powder
Working time
20-30 minutes (+18 °C)
Instructions for use
Strew Kiilto SR DF powder slowly in cool (+18–20 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 2-3 min and then remix once again. The plaster is applied by hand with a steel trowel. Surface can be after-treated by moisturizing with water spray.
Carry out plastering at the normal room temperature. Prevailing conditions, such as temperature of the room, plaster and water, substrate quality and humidity and relative humidity affect significantly the setting and drying time. Our recommendations can therefore be used as a guideline only.
Additional information
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Environment and safety
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.