Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.
Kiilto Pro Sanitary Silicone
M1-classififed low odour neutral silicone sealant for sealing expansion joints, junctions between walls and floors and other material boundaries and penetrations in wet areas. Contains antifungicide. Also outdoors.
Special features
- thermal resistance +120 °C
- contains antifungicide
- low odour
- not overpaintable
- for interior and exterior use
Application
Kiilto Pro Sanitary Silicone is a one-component neutral silicone. Complies with the requirements EN 15651-3:2012 standard. Not for aquariums or natural stone, eg. marble. For mounting mirrors and toilet seats we recommend Kiilto Masa. When installing single small tiles and higher thermal resistance is needed (+150 °C), you can use grey silicone.
Package Size
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
310 ml
Color
00 transparent
10 traffic white
11 linen
28 sand
29 light beige
30 beige
31 toffee
33 cocoa
36 terracotta
38 ground brown
39 marble white
40 concrete
41 stone
42 steel
43 pearl
44 iron
46 silver
48 antracite
50 graphite black
90 iceblue
94 smoke
EAN Code
6411513510315
6411513511312
6411513550311
6411513717318
6411513526316
6411513551318
6411513512319
6411513527313
6411513571316
6411513528310
6411513513316
6411513547311
6411513569313
6411513570319
6411513530313
6411513652312
6411513572313
6411513718315
6411513549315
6411513553312
6411513654316
Colors
available in several colours
Coverage
5 x 5 mm joint, approx. 12 m / cartridge
Curing rate
approx. 2 mm in 24 h and approx. 10 mm in
a week
Density/specific weight
n. 1,0 kg/dm³
Hardness
Shore A approx. 20
Skin time
5–20 min (20 °C, RH 50 %)
Storage
Store in a tightly closed original package in a dry, cool place (below + 25 °C). Best before date on the package.
Temperature resistance when dry
-40…+120 °C, grey +150 °C
Type/binder
moisture curing neutral silicone polymer
Working conditions
optimal temperature is +18–20 °C, however within the range +5–40 °C
Instructions for use
The surface to be jointed must be dry, free from dust and grease. Solid foam plastic profile can be used as joint bottom filler.Unscrew the cap from the extrusion tip. Cut open the cone at the front end of the cartridge. Screw the extrusion tip in place and cut it to the desired size. Press silicone to the joint and smooth it immediately by using a trowel or fingertip moistened with clean water. Leave the extrusion tip in place and close the cartridge with the cap properly after use. To facilitate cleaning, apply, for example, masking tape on
both sides of the joint. Remember to remove the tape right after application. When renewing silicone joints, the old silicone must be removed.
Additional information
The prevailing conditions, such as air temperature, the temperature of the silicone and the joint, substrate’s material and air humidity as well as the amount of silicone applied has a strong impact on the skin time and vulcanization.
Some paints, detergents and solvents contain chemicals that may discolor silicone, either in direct contact with the silicone or when released in the air. Also, similar compounds may be released from some wood types (including heat-treated radiata pine) and acetoxy silicones (so-called acetic silicones). Some plastics and rubbers contain plasticizers that may also react with silicone. If needed, we recommend preliminary tests prior to use. If using ceramic tile paints, use acetic Kiilto Pro Silicone E Sanitary Silicone.
Silicone joints’ lifespan is limited. It depends on the room’s utilization rate, cleaning and ventilation. Check the condition of joints in wet
rooms regularly and replace them with new ones when necessary, at least every 5 years.
Kiilto Pro Sanitary Silicone adheres well on different materials (e.g. ceramic tiles, glass, furniture materials). However, preliminary adhesion tests are recommended to ensure proper adhesion. For transparent plastics (PC, PMMA) we recommend clear silicone.
When sealing joints in one location, ensure that all silicone cartridges have the same batch number.
The colours of Kiilto Pro Sanitary Silicone have been toned in a neutral light to match the colours of Kiilto Pro Tile grout. Light in different light sources is different. Thus, the lighting used in the space can affect how the color of the silicone looks.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted for the incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide if provided.