Kiilto Pro Speed
A very fast bonding elastic adhesive sealant. Ideal for e.g. mounting toilet seats and gluing light partition wall frames to the surrounding concrete structures. Can also be used as an acoustic sealant. For indoor and outdoor use.
Special features
- Fast bonding, elastic, used as an acoustic sealant
- Rapid strength build up after 15 minutes
- Gluings and sealings
- Coverage 5 x 5 mm joint, approx. 12 m/cartridge
- For indoor and outdoor use
Materials
Application
A very fast bonding elastic adhesive sealant. Bond strength develops much faster than with typical 1-component adhesive sealants. Fast strength development requires that air humidity penetrates to the bond through e.g. porous materials such as wood, concrete, levelling compound, unglazed ceramics etc. or the bond is moistened with water.
Ideal for e.g. mounting toilet seats and gluing light partition wall frames to the surrounding concrete structures. Can be used as an acoustic sealant e.g. in light partition wall inlets. Sound insulation measurements were carried out according to ISO 10140 – 2:2010. For indoor and outdoor use. Kiilto Pro Speed has good adhesion on various stone surfaces, concrete, most metals, wood, glass and glazed surfaces as well as epoxy and polyester surfaces. With plastic and rubber, preliminary adhesive tests are recommended prior to actual use. Excellent adhesion to different materials – in most cases no need for priming. Elastic, yet mechanically strong bond. Does not contain isocyanate, PVC or solvents. Almost odourless. Good resistance against chemicals (weak solutions). Excellent resistance to weather conditions and UV radiation. Almost non-shrinking. Paintable with most paints (test always before use).
Package Size
290 ml
Color
white
EAN Code
6411512468297
Colors
off-white
Curing through
3 mm/d, approx. 10 mm/7 d (23 °C/50 % RH)
Density/specific weight
approx. 1.55 kg/dm³
Elongation at break
160 % (DIN 53504)
Hardness
Shore A 60
Lap shear strength
– SS/SS 3.5 N/mm²
Package sizes
290 ml cartridge
Skin time
5 min (23 °C, 50 % RH)
Storage
Unopened at +10–25 °C for 12 months.
Temperature resistance when dry
-40–+90 °C
Tensile strength
2.3 N/mm² (DIN 53504)
Viscosity
3 million mPas (BrookField H-Path T-F/2.5 +20 °C)
Working conditions
+1–+40 °C
Instructions for use
When gluing wooden and metal frames, see that the surfaces and materials are straight, clean and strong. Apply adhesive sufficiently to ensure a strong bond.
When mounting a toilet seat with a thin layer of adhesive, the bond strength can be achieved in up to 15 minutes. Drying can be accelerated with a thin layer of water spray.
When used as an acoustic sealant, the surface can be finished while fresh with a moistened tool.
When gluing large uniform surfaces or surfaces in very dry conditions, we suggest light spraying with water (approx. 5–10 g/m²). Close the package carefully after use. Uncured adhesive can be removed with xylene or acetone, cured adhesive only mechanically.
Additional information
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined under standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Therefore, we cannot be held responsible for the final result. Ensure the product’s suitability to the intended application.
Environment and safety
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Please refer to the material safety data sheet. For more information about the product and package disposal, visit www.kiilto.com.
