Kiilto Pro Clear
Transparent adhesive
A clear and elastic adhesive sealant for interior and exterior use. Easy to apply. Can be used for eg. fixing toilet seats, mirrors and glass tiles. Suitable also for natural stone and movement joints. One-component.
Special features
- Â Good initial tack, clear, elastic
- Â For gluing and sealing
- Â Coverage 5 x 5 mm joint, approx. 12 m/cartridge
- Â Drying time 3 mm/d, approx. 10 mm/7 d
- Â For indoor and outdoor use
Materials
Application
One-component Kiilto Clear adhesive is a clear, elastic sealant based on silyl polymer technology. Suitable for fixing and sealing in- and outside. Suitable for applications that need fast curing, e.g. vehicle bodies (cars, boats and mobile homes), linings, construction boards and movement joints exposed to mechanical wear.
Package Size
290 ml
Color
transparent
EAN Code
6411512442297
Application temperature
+5–+35 °C
Consistency
paste with high viscosity
Coverage
5 x 5 mm joint, approx. 12 m/cartridge
Curing rate
3 mm/d
Density/specific weight
approx. 1.1 kg/l
Elongation at break
250 % (DIN 53504)
Hardness
Shore A 55
Max. joint distortion
± 20 %
Package sizes
290 ml
Skin time
approx. 10 min (23 °C, RH 50 %)
Storage
Unopened at +10 °C–25 °C in a dry place for 12 months.
Temperature resistance when dry
-40 – +90 °C
Tensile strength
3.5 N/mm² (DIN 53504)
Type/binder
SMP-polymer
Instructions for use
Materials to be used must be dust-free, dry and free from grease and oil. Good adhesion on various stones, concrete, most metals, wood, glass and glazed surfaces as well as epoxy and polyester surfaces. With plastic materials adhesive tests are recommended prior to actual use. Cut open the cone at the front end of the cartridge. Screw the extrusion tip in place and cut it to appropriate size to fit the joint width. Apply adhesive with a manual or compressed air pistol, and smooth with a trowel to desired shape, if needed. Apply adhesive in stripes and smooth with a trowel, if needed. Close the package carefully after use. Uncured product can be removed with xylene or acetone. Cured product can be removed only mechanically. Under extreme climatic conditions KiiltoFix Clear may slightly change its colour. Not recommended to be used for glazing (fixing glass or sealing glass in window frames)
Additional information
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Environment and safety
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.
