Kiilto OT Light
A lightweight smoothing plaster with good filling properties for walls in wet and dry areas. Sprayable. Very low drying shrinkage. When coated suitable also for exterior use. Partial plastering 5-50 mm, over plastering 5-30 mm. Cementitious.
Special features
- Â light to apply, very low drying shrinkage
- Â over levellings, fillings
-  coverage 1.3 kg/m²/mm
- coatable:1-3 d
- interior areas;Â suitable also for exterior areas when coated
Application
Kiilto OT Light is a lightweight plastering mortar for rock material wall surfaces. The finished surface can be painted or tiled. If a smoother surface is needed, for example under waterproofing membrane, the surface can be over plastered with Kiilto SK Märkätilatasoite, wall plaster for wet areas, or by floating with a steel trowel.
Package Size
20 kg
EAN Code
6411513952207
Colors
grey
Compression strength
CSIII (EN 998-1)
Coverage
1 mm layer/m² solid matter weights approx. 1.3 kg
Curing rate
approx. 1-3 d (+18 °C) (depending on layer thickness and prevailing conditions)
Layer thickness
partial levelling 5-50 mm, over plastering 5-30 mm
Max. grain size
2 mm
Mixing ratio
4.2-5.0 l water / 20 kg bag
Package sizes
20 kg bag
Storage
In an unopened package max. 1 year in dry conditions.
Substrate humidity
concrete < 90 % RH
Working conditions
recommendation: + 18–20 °C, lowest operating temperature +5 °C
Working time
approx. 2 hours (+18 °C)
Instructions for use
Strew Kiilto OT Light powder slowly in cool (+18–20 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 10-15 min and then remix once again. Apply by spraying and smoothen with a steel trowel. Can be applied with most common spraying guns for plasters, provided that the nozzle is big enough.
Additional information
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Environment and safety
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.
