Kiilto Pro Premium
An elastic power glue for wood, concrete, stone and glass as well as different types of metals and plastics. Excellent initial tack. Solvent-free, does not contain isocyanates. Thermal resistance ranges -40–+100 °C. Salt water resistant. One-component.
Special features
- The best initial tack, excellent thermal resistance. Resistant to moisture and chemicals
- Â Suitable for bondings
- Â Coverage 8.9 x 8.9 mm triangle-shaped joint, approx. 7.3 m/cartridge
- Â Drying time 3 mm/d, approx. 10 mm/7 d
- Â Suitable for indoor and outdoor use
Materials
Application
One-component Kiilto Premium is based on silyl polymer technology and has high bond strength. Suitable for fixing and sealing inside and outside. Ideal for applications which require high initial tack (cars, boats, mobile homes), fixing skirtings and building boards. Materials to be used must be free from dust, grease and oil. Good adhesion on various stones, concrete, most metals, wood, glass and glazed surfaces as well as epoxy and polyester surfaces. With plastic materials adhesive tests are recommended prior to actual use. Has M1-emission classification for building products. Solvent-free, does not contain isocyanates or phthalates. Paintable with most water-based paints (always test before use). Very good resistance against weathering, good resistance against UV light. Good resistance to chemicals (weak solutions). Salt water resistant. Not suitable for glazing.
Package Size
290 ml
Color
white
EAN Code
6411512440293
Application temperature
+1–40 °C
Consistency
paste with high viscosity
Coverage
8.9 x 8.9 mm triangle shaped joint, approx. 7.3 m/cartridge
Curing rate
3 mm/d, approx. 10 mm/7 d (23 °C/50 % RH)
Density/specific weight
approx. 1.6 kg/l
Elongation at break
350% (DIN 53504)
Hardness
Shore A 60
Lap shear strength
SS/SS 2 N/mm²
Max. joint distortion
± 25 %
Package sizes
290 ml
Shrinkage
approx. 2 %
Skin time
approx. 10 min (23 °C, RH 50 %)
Storage
Unopened at +10–25 °C for 18 months.
Tensile strength
2.2 N/mm² (DIN 53504)
Type/binder
MS-polymer
Instructions for use
Cut tip of the cartridge and place the nozzle. Kiilto Premium is applied with a hand or battery gun. Note! Consider product’s high viscosity, when choosing the application gun. Apply in stripes. Ensure that the surfaces to be sealed/bonded are clean before applying adhesive. Close the package carefully after use. Uncured product can be removed with xylene or acetone. Cured product can be removed only mechanically. Prevailing conditions such as air temperature, air humidity, substrate’s material and humidity as well as the amount of adhesive applied have a strong impact on the skin time and drying.
Additional information
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Environment and safety
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.
